AL-Murad Non-Slip Wall Tile Adhesive 15kg
- High Initial Grab- Non-Slip- Covers up to 7.5m2 This Adhesive is suitable for installing most types of ceramic tiles onto gypsum plaster, plasterboard and fully cured concrete walls in bathrooms and kitchens.
A ready mixed waterproof wall tile adhesive, designed to be applied within internal locations such as kitchens and bathrooms. Aqua Fix covers all areas subject to regular wetting, but not total water immersion. Recommended receiving areas for fixing tiles include bathrooms, showers, splash-backs and tiled walls that are in regular contact with water. Aqua Fix is available in brilliant white.
PALACE Heat-Resist is a polymer-fortified heat-resistant tile adhesive, designed to provide a high-strength, durable bond in areas where tiles are installed around a radiant source of heat which does not reach temperatures in excess of 250°C. This is typical of conditions found around domestic installations such as a log burning fire, cooking range/stove or a traditional Aga Oven. This heat-resistant tile adhesive is a pale grey powder-based blend incorporating special hydraulic binders which produces a non-slump, fast-setting paste. The adhesive is suitable for fixing ceramic, porcelain and vitrified tiles in areas surrounding a radiant source of heat. PALACE Heat-Resist should only be used for fixing tiles onto solid masonry surfaces or cement board structures which are stable when exposed to high temperatures. Note: It is essential to confirm that all tiles selected for use in this type of location are similarly heat-resistant. Conforms to EN 12004 C2FT-S1 and should ideally be used with PALACE Colour-Lock Grout Fast-setting adhesive High early strength Polymer-fortified tile adhesive This heat-resistant tile adhesive can be exposed to temperatures up to 250°C For use around ovens, stoves & log burning fires
MapeGrip D1 Readymix Adhesive 15kg
- High Initial Grab- Non-Slip- Covers up to 7.5m2 This Adhesive is suitable for installing most types of ceramic tiles onto gypsum plaster, plasterboard and fully cured concrete walls in bathrooms and kitchens.
MapeGrip D2 Readymix Adhesive 15kg
Fully water-resistant flexible dispersion adhesive for internal wall tiling with most ceramic tiles and mosaics. Non-slip and high grab. Suitable for commercial and domestic showers and wet areas. - High Initial Grab - Non-Slip - Covers up to 7.5m2
Unibond Navy Wall Tile Grout With Glitter 1.38kg
UniBond Ultra Force wall tile grout glitter is a ready mixed Navy wall tile grout with added silver glitter, allowing you to personalise your space with colour and sparkle. The Ultra Force fibre technology for ultimate durability. The formula is waterproof to protect against mould for long lasting results .The drying time is 24 hours and it is suitable for ceramic, porcelain, mosaic and natural stone surfaces, so can be used in all rooms. The high grab non-slip formula makes it easy to use for a your tiling jobs. How to use: 1. Ensure that the grout joints are clean, dry and free from dust 2. Working in small areas at a time, press the grout into the joints with a grout float. Do not over tool. 3. Smooth off the grout line with a grouting tool. Remove any surplus grout immediately with a damp sponge wiping diagonally across the tiles 4. Allow the grout to dry for 24 hours then polish with a clean cloth 5. To maintain a mould free grout, wash regularly with a fungicidal cleaner.
