Weberset SPF White 20kg

White
Code: 10022723
  • £25.55
  • RRP £29.99
Item in Stock   |   Usually dispatched within 24 hours
Loading...
Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors.

Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags.

Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely.

Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates:

• Walls and floors
• Interior and exterior situations
• Underfloor heating
• Undertile warming
• Overboarded wooden floors
• Low porosity tiles or substrates
• Power-floated screeds
• Tiling onto existing tiles

Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice.

Preparation:
Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling.

Prime porous or dusty surfaces. Weber PR360 is normally recommended for most walls in dry areas. Weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles.

Technical Data:
Bed thickness: 3 – 6mm (may be exceeded in small areas only)
Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)
Open time: 30 minutes
Working time (pot life): 1 hour after mixing
Set time: 24 hours – light foot traffic, full load after 48 hours
Temperature resistance: –10°C to 100°C and frost resistant when set
Water addition: 5 litres per 20kg
Particle size: Up to approx. 0.5mm

Currencies Accepted

We accept online payments in British Pounds only.

We use Secure Trading Payments to process all our transactions.

Secure Trading provides flexible online payment & omnichannel solutions to accelerate the growth of your business.

Tiles will be shrink-wrapped on a pallet and delivered to the ground-level edge of your property (curbside). Due to insurance purposes, the driver will NOT be able to assist getting the tiles into your property. Orders under 20kg will be delivered by parcel courier.

When ordering Tile Samples, you will receive a small cut sample, either 10cm x 10cm or 15cm x 15cm.

We hope that you will be pleased with the tiles that you have bought from Al-Murad Tiles. If you wish to return any goods to us, they must be returned to us in re-saleable condition, in their full original carton/box, and the range is still for sale via our website.

There will be a restocking charge of 33%  of the goods returned. If you require Al-Murad Tiles to arrange the collection of tiles to be returned, the cost of haulage will also be deducted from the total refund (these costs can all be agreed before deciding if you want to return your tiles).

If the goods are not in a re-saleable condition when they arrive back with us, Al-Murad Tiles reserve the right to amend the amount of the refund based on the value of re-saleable goods.

If you decide to return an entire order, costs will need to be deducted for the delivery and the return costs.

 

FREE DELIVERY - orders over £699 will take up to 2-3 working days (excluding Scottish Highlands and Lowlands).

 

STANDARD DELIVERY - From £60.00 for orders under £699, will take up to 2-3 working days (excluding Scottish Highlands and Lowlands).

 

NOTE: There will be an extra charge for the following postcodes:

 

AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO, SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD, HS AND TQ.

 

Vehicle Size & Access

☐7.5 TONNE TRUCK

☐18 TONNE TRUCK

The best way to determine if a lorry can access your home/business address is whether you have a bin vehicle collecting from outside your premises.

Wide enough access to accept large delivery lorries (minimum 2.8m)

No obstacles - free of obstacles that could obstruct delivery (e.g. low low-hanging tree branches)

No Inclines - the delivery area should be flat, rather than a steep slope

Hard & level surface - hand pallet trucks only operate on hard, flat surfaces, not loose ground such as grass or gravel

Turning space - ample room to manoeuvre and position the lorry

You MUST advise if there are any parking or time restrictions at the delivery point.

                     

General Delivery Information

 

From our carrier, you will receive a text message on the day of the delivery with a 2-hour delivery window. If there are any changes or delays, you will receive an update via text.

If you have any doubts regarding the condition of the delivery, please ensure to sign for the goods “UNCHECKED”.

You must be available to accept delivery on the date you have requested; failure to do so will result in paying for a redelivery charge, or alternatively, you can collect from our carrier's depot.