Weberset Rapid SPF Grey 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF Grey 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. weber pr360 is normally recommended for most walls in dry areas. weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Italian Design Invictus Cross Decor 60cm x 60cm Wall & Floor Tile

Colour: White/Grey/Beige Material: Porcelain Finish: Matt (Rectified) Size (cm): 60cm x 60cm Thickness (mm): 9mm Suitability: Wall & Floor N° of Tiles per Square Metre (m2): 2.77 Tiles N° of Tiles per Pack: 4 Tiles Availability: In Stock

Oakwood Grey 30cm x 120cm x 2cm Slab Outdoor Tile

Colour: Grey Material: Porcelain Finish: Matt Size (cm): 30cm x 120cm Thickness (mm): 20mm Suitability: Outdoor N° of tiles per square metre (m2): 2.78 tiles

Cotage Wood-Effect Grey 20cm x 120cm Wall & Floor Tile

Colour: Grey Material: Porcelain Finish: Matt Textured Size (cm): 20cm x 120cm Thickness (mm): 10mm Suitability: Wall & Floor N° of tiles per square metre (m2): 4.17 tiles

Rovere Grafite 22.5cm x 90cm Wall & Floor Tile

Colour: Grafite Material: Porcelain Finish: Matt  Slip Rating: R9 Size (cm): 22.5cm x 90cm Suitability: Wall & Floor N° of Tiles per Square Metre (m2): 4.9 Tiles N° of Tiles per Pack: 6 Tiles Availability: In Stock

CT1 Anthracite Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Anthracite Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Grey Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Grey Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

Beechwood Matt 20cm x 120cm Wood Effect Wall and Floor Tile

Colour: Beechwood Material: Porcelain Finish: Matt (Rectified) Size (cm): 20cm x 120cm Thickness (mm): 10mm Suitability: Wall and Floor N° of Tiles per Pack: 5 tiles N° of Tiles per Square Metre (m2): 4.17 tiles

1109 SPC Vinyl Shadowed Ember Wood Effect 18.3cm x 122cm x 5mm (2.23M2 Per Pack) SOLD PER PACK

Sold per pack (2.23m2 per pack)Transform floors in your home or commercial space with our exceptionally practical and super stylish SPC (stone plastic composite) flooring in a Jacobean wood-effect design complete with a smooth matt finish.Comprising four main layers - including a transparent wear layer on top for effective scratch resistance, a vinyl top coat which displays the SPC flooring's wood-effect finish, a durable, 100% waterproof SPC core for wear resistance, and an attached underlayment for sound reduction - our SPC flooring tiles are among the most practical flooring solutions available. On top of that, their realistic imitation wood grain finish presents a low-cost alternative to genuine hardwood flooring which can be out of reach for homeowners on a budget.The Shodowed Wood design brings grey colouring to floors everywhere, from kitchens and bathrooms to offices, hotels and beyond. This wood-effect SPC vinyl flooring will pair perfectly with a cool minimalist or modern Scandi-style space when coordinated with monochromatic furniture and fittings and carefully chosen metallic accents.

1201 Pearlwood Matt 121.8cm x 19.7cm x 8mm (2.4m2 Box) SOLD PER PACK

  Sold per pack (2.4m2 per pack) Colour: Pearl Material: Laminate Finish: Matt Size (cm): 19.7cm x 121.8cm Suitability: Floor N° of Planks per Pack: 8 planks N° of Planks per Square Metre (m2): 4.5 planks

1204 Alder Grey Matt 121.8cm x 19.7cm x 8mm (2.4m2 Box) SOLD PER PACK

Sold per pack (2.4m2 per pack) Colour: Grey Material: Laminate Finish: Matt Size (cm): 19.7cm x 121.8cm Suitability: Floor N° of Planks per Pack: 8 planks N° of Planks per Square Metre (m2): 4.5 planks

Morning Dew SPC Herringbone 60cm x 12.5cm (1.50m2 ) Floor Tile SOLD PER PACK

SOLD PER PACK (1.50 M2 Per Pack) Colour: Morning Dew Material: SPC Vinyl  Finish: Matt Size (cm): 60cm x 12.5cm Suitability: Floor No of Planks Per Square Meter (m2): 13.3 Availability: In Stock Transform floors in your home or commercial space with our exceptionally practical and super stylish SPC (stone plastic composite) flooring in a Concrete Bone stone-effect design complete with a smooth matt finish. Comprising four main layers - including a transparent wear layer on top for effective scratch resistance, a vinyl top coat which displays the SPC flooring's wood-effect finish, a durable, 100% waterproof SPC core for wear resistance, and an attached underlayment for sound reduction - our SPC flooring tiles are among the most practical flooring solutions available. On top of that, their realistic imitation wood grain finish presents a low-cost alternative to genuine hardwood flooring which can be out of reach for homeowners on a budget. The Concrete Bone design brings mixed grey colouring and a rustic concrete-effect finish to floors everywhere, from kitchens and bathrooms to offices, hotels and beyond. This stone-effect SPC vinyl flooring will pair perfectly with an ultra-modern minimalist space when coordinated with monochromatic furniture and fittings and carefully chosen metallic accents. An SPC vinyl has several main layers. Wear Layer – The wear layer is the top coating on the vinyl floor that is transparent. This adds scratch and stain resistance to the vinyl plank. Vinyl Top Coat – Each SPC vinyl floor will have a thin layer of vinyl attached to it. This layer is waterproof and will contain the pattern, texture and look of the floor. SPC Core – The SPC core is made by combining limestone powder and stabilizers to create a dimensionally stable and waterproof core. Attached Underlayment – SPC vinyl floors may or may not come with attached underlayment. These are usually included to help with sound reduction and add softness to the floor.Waterproof: This is one of the biggest factors in choosing an SPC vinyl. It is 100% waterproof, which means it can be installed in kitchens, bathrooms, laundry rooms and restaurants without worry!     Stability in Temperature Fluctuations: With the stone construction, an SPC vinyl core is more stable in environments with temperature changes, such as cabins, homes with AC units and homes with humidity fluctuations. Appearance: SPC vinyl flooring can have a variety of looks, textures and styles. It will be hard to believe they are vinyls! DIY Installation: SPC vinyl flooring is a click-lock installation system. It is installed similarly to a regular vinyl and laminate with a tongue and groove installation. No glues or extra tools are required! This is a floor for the everyday DIY’er. Comfort: The SPC vinyl floor is going to feel more sturdy and cushioned under foot than a traditional vinyl due to the dense core and thickness of the plank. A thicker plank will give you more comfort. Also, some SPC vinyls will have attached underlayment that adds to the softness under foot. If it does not have attached underlayment, you can opt for an LVT specific underlayment to install over the subfloor. Sound: With the dense core, this plank tends to have a quieter sound. You will not hear a hollow sound when you walk on it. Affordability: SPC vinyl plank flooring is very budget friendly. Depending on the brand and features, you can find SPC vinyl in a variety of price ranges. Features like attached underlayment, texture and edges can increase a floors price. Easy Maintenance and Cleaning: An SPC vinyl will have the same cleaning and maintenance needs as a regular vinyl. These planks are designed to be easily cleaned with regular sweeping and mopping.

SPC003GO SPC Vinyl Grey Oak Wood Effect 18cm x 122cm SOLD PER PACK (2.19M2 Per Pack)

This item is sold per pack (2.19m2 per pack) Colour: Grey Oak Material: SPC Vinyl Finish: Matt Size (cm): 18cm x 122cm Thickness (mm):  Suitability: Floor

SPC002EO SPC Vinyl English Oak Wood Effect 18cm x 122cm SOLD PER PACK (2.19M2 Per Pack)

This item is sold per pack (2.19m2 per pack) Colour: English Oak Material: SPC Vinyl Finish: Matt Size (cm): 18cm x 122cm Thickness (mm):  Suitability: Floor

SPC001AW SPC Vinyl Ash White Wood Effect 18cm x 122cm SOLD PER PACK (2.19M2 Per Pack)

This item is sold per pack (2.19m2 per pack) Colour: Ash White Material: SPC Vinyl Finish: Matt Size (cm): 18cm x 122cm Thickness (mm):  Suitability: Floor

Silver Oak Acoustic Wood Panel 120cm x 60cm x 21mm

Transform walls in your home or commercial space with our stylish and practical noise-cancelling acoustic wall panels. Complete with a stunning Scandi-style wood-effect finish, this 120cm x 60cm Silver Oak wood slat wall panelling brings premium styling to walls with its sleek dark grey wood grain design.To reduce unwanted background noise, improve ambience in your space and create a more intimate vibe in living rooms, meeting rooms, home offices, cafés, restaurants, recording studios and beyond, use our Silver Oak acoustic wood panels as an interior wall cladding solution.These 120cm x 60cm Silver Oak acoustic wall panels can be laid horizontally or vertically depending on your noise-reducing needs. Install the panels horizontally to absorb sound in the room, minimising echoes and reverb - or mount vertically to prevent sound from transferring through walls. Cover 15-30% of your walls with the wood panelling for best results, or up to 50% in gyms, home cinemas and other especially noisy spaces to keep sound transfer to a minimum.State-of-the-art wall panels for effective soundproofingAll of our acoustic wall panels are made from 230kg/m3 high-density polyester felt fabric - a durable yet lightweight material which won't cause any damage to your walls. The soundproofing panelling is designed to reduce noise, eliminate sound impurities and improve speech intelligibility in homes and commercial spaces alike. We pride ourselves on using the finest quality soundproofing materials to ensure our acoustic wood panels are flame-retardant, odorless, non-toxic, corrosion-resistant and fade-resistant for a practical and hard-wearing wall cladding solution. In the noise reducing stakes, the acoustic foam panels perform well - achieving a noise reduction coefficient of 0.95 and an absorption coefficient of 0.8.Timeless, on-trend wood-effect wall panellingAvailable in a variety of sophisticated and contemporary wood-effect finishes, our acoustic wall panels deliver on-trend style as well as high-performance functionality. Beyond its numerous soundproofing properties, the panelling can also be mounted in bedrooms and living rooms as an elegant decorative feature to transform drab walls into a striking design feature. Explore our selection of wood grain finishes and colour options to find acoustic wall panels in a style that complements the wider design scheme of your home or commercial space.

Al-Murad Slow Set Flexible Grey 20kg

Al-Murad Slow Set Flexible (Grey) Wall & Floor Tile Adhesive is an easy to use standard setting adhesive for fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay. It is available in white or grey and gives a 4 hour working time before curing at 24 hours to a fully water-resistant bond suitable for interior / exterior use and locations which are frequently wet. Al-Murad Slow Set Flexible Wall & Floor Tile Adhesive is available in WHITE & GREY, with a long open time and excellent non-slip properties, which make it the perfect choice fixing large format wall tiles in circumstances where a ready mixed adhesive would not be suitable.

Al-Murad Trade Rapid Set Flexi Grey 20Kg

Al-Murad Trade Rapid Set Flexi Grey is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available in grey or white and allows grouting to proceed 3 hours after it cures to a fully water-resistant high early strength bond suitable for interior / exterior use and locations which are frequently wet.

Sedir Grey Wood Matt 60cm x 120cm Wall & Floor Tile

El Barco Forest Neutro 7.5cm x 30cm Wall & Floor Tile

Naturewood Light Grey 20cm x 120cm Wall & Floor Tile

SPC025BG SPC Vinyl Burnt Grey 18cm x 122cm SOLD PER PACK (2.19M2 Per Pack)

This item is sold per pack (2.19m2 per pack) Colour: Burnt Grey Material: SPC Vinyl Finish: Matt Size (cm): 18cm x 122cm Thickness (mm):  Suitability: Floor

AT.Alpi Perla 20cm x 60cm Wall & Floor Tile

AT.Alpi Gris 20cm x 60cm Wall & Floor Tile

AT.Alpi Grafito 20cm x 60cm Wall & Floor Tile

Mapei MAPEGUM WPS 5kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Mapei MAPEGUM WPS 10kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Oak Wood Ash 20cm x 90cm x 2cm Slab Tile

Colour: Ash Material: Porcelain Finish: Matt Size (cm): 20cm x 90cm Thickness (mm): 20mm Anti Slip Rating: R12 Suitability: Outdoor & Indoor  N° of Tiles Req. per Square Metre (m2):  5.5 Tiles  

Ceramica Sant Agostino Fusion Art Grey 30cm x 120cm Wall & Floor Tile

Wood Grey 30cm x 30cm Mosaic Tile

SPC012AG SPC Vinyl Click Flooring Ash Grey 18cm x 122cm SOLD PER PACK (2.19M2 Per Pack)

This item is sold per pack (2.19m2 per pack) Colour: Ash Grey Material: SPC Vinyl Finish: Matt Size (cm): 18cm x 122cm Thickness (mm):  Suitability: Floor

Wood Panel Grey 15cm x 60cm Peel&Stick Tile

Belize Peel & Stick wood tiles are the easy, DIY way to add the unique look of rustic wood to your walls without the hassle of grout or the expense of a contractor. Simply peel off backing and stick tile to full walls. Or, use as an accent, backsplash or custom design in a variety of environments including kitchens, baths, dining rooms or anywhere unique appeal is desired.  

Wood Panel Grey Brown 15cm x 60cm Peel&Stick Tile

Belize Peel & Stick wood tiles are the easy, DIY way to add the unique look of rustic wood to your walls without the hassle of grout or the expense of a contractor. Simply peel off backing and stick tile to full walls. Or, use as an accent, backsplash or custom design in a variety of environments including kitchens, baths, dining rooms or anywhere unique appeal is desired.  

Tradeflex Grey 20kg

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and it’s fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Slow Set Grey (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Atelier Gris 24cm x 88cm Wall & Floor Tile

Polished Wood Dark Grey 15cm x 60cm Wall & Floor Tile

Italian Design Blendart Grey Craft 30cm x 120cm Wall & Floor Tile

Add a high quality vintage wood effect look to your home with the new Vintage Porcelain Tiles from Blendart. Suitable for Bathrooms, Kitchens and any other internal domestic wall or floor location. Now available in a variety of colours and sizes.

Mapei Mapeker Flexi Grey 20kg

Suitable for Porcelain,Ceramic & Non Moisture Sensitive Natural Stone  Sets in 2-3 hours  Ready to Grout in 3 hours  Wall & Floors Suitable for Underfloor/Undertile Heating  Suitable for Rigid Plywood and Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply) Gypsum Plaster (When Primed with Mapei PrimerG) Plaster Boards, Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in White.

Mapei Keraquick Flexi Grey 20kg

Mapei - Keraquick Rapid-Set Flexible Adhesive (Grey) 20kg  This flexible and fast setting Adhesive is suitable for Porcelain, Ceramic, Walls & Floors, Wooden Floors, Concrete Floors and Swimming Pools.  If you are using it with plywood and chipboard, mix it with Latex Plus. 1 Bag covers a average of 8m2 on walls and 5m2 on floors.  Same Adhesive available in White - Suitable For Porcelain Tiles And Underfloor Heating - Walls & Floors - Non Slip - Polymer Modified                                - Interior & Exterior