LTP Glaze Protector 1L

Colour: Clear Size (ml): 1000ml Approximate Coverage: 30-40m2 per litre (one coat), depending on substrate perosity    Suitability: Interior use only, not for wetrooms or shower enclosures though. Retains the 'just washed' look on glazed ceramic, porcelain, unpolished porcelain and vitrified quarry tiles You can use the LTP Coverage Calculator to confirm how much you will need of this product. The Technical Data sheet can be found here. NOTE: Not for use on wetrooms or shower enclosures. Do not over-apply as too many coats may cause unsightly build up and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully water resistant. Always test first to establish the correct method of application and optimum number of coats before general use. 

LTP Grout And Tile Protector Aerosol 600ml

Forms a colourless barrier Helps protect wall & floor porous grout joints. Protects from penetration of water,dirt,oil,grease and limescale A colourless barrier that helps to protect porous wall and floor grout joints from penetration by water,dirt,oil,grease and limescale, making treated surfaces easier to keep clean. Ideal for use in wet rooms and shower enclosures. Used as a top coat this product is an easy way to further protect natural stone and all other types of masonry surface.Overspray on most surfaces will completely dissipate and not leave any hard to remove residue. When sealing a porous stone it is advisable to use a suitable liquid impregnator such as LTP Mattstone or LTP Colour Intensifier before finishing with LTP Grout & Tile Protector to achieve the best result.