LTP Rust Stain Remover 1L

Colour: Clear Size (ml): 1000ml Approximate Coverage: Up to 5m2 per litre    Suitability: Ideal for all types of polished and unpolished natural and artificial stone including marble, granite, travertine, split face stone cladding, sandstone, concrete, terracotta and porcelain tiles You can use the LTP Coverage Calculator to confirm how much you will need of this product.

LTP Grimex 1L

Heavy Duty Grime & Stain Remover. Ideal for use in Restoring Old Tiles and Floors Stain Remover: including Oil, Grease and Dirt. Removes Old Wax Layers. For Interior & Exterior Use     Suitable for artificial and natural tiles and floors including travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick, external paving and driveways. Intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths. To remove cement and grout stains you may find LTP Grout Stain Remover is a more effective alternative. Important: Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by   TIPS: LTP Grimex is effective at removing the seal from natural stone surfaces. After using LTP Grimex you may wish to re seal or enhance your surface using an appropriate sealing product. Maintaining your sealed surface with the correct maintenance product will extend the life of the seal and offer additional protection.

LTP Glaze Protector 1L

Colour: Clear Size (ml): 1000ml Approximate Coverage: 30-40m2 per litre (one coat), depending on substrate perosity    Suitability: Interior use only, not for wetrooms or shower enclosures though. Retains the 'just washed' look on glazed ceramic, porcelain, unpolished porcelain and vitrified quarry tiles You can use the LTP Coverage Calculator to confirm how much you will need of this product. The Technical Data sheet can be found here. NOTE: Not for use on wetrooms or shower enclosures. Do not over-apply as too many coats may cause unsightly build up and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully water resistant. Always test first to establish the correct method of application and optimum number of coats before general use. 

LTP Crackle Glaze Protector 500ml

Colour: Clear Size (ml): 500ml Approximate Coverage: With 2 coats, this should cover up to 5m2    Suitability: For ceramic tiles that have a porous crackle glaze. To be used on crackle glaze tiles and grout joints You can use the LTP Coverage Calculator to confirm how much you will need of this product. The Technical Data sheet can be found here. NOTE: Due to variations in crackle glaze tiles, always test the product first to ascertain the correct number of coats to be applied