LTP Grout Stain Remover 1L

Cement & Limescale remover. Also removes grout residue. For interior & exterior use. A rapid action cleaning agent Cement, Limescale & Grout Residue Remover For Interior & Exterior use For glazed and un-glazed ceramics, slate, quarry tiles, brick, terracotta & acid resistant natural stones. A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits from glazed and unglazed ceramics, slate, quarry tiles, brick, terracotta, and stone. May be used in dilute or concentrated form. (Do not use on Limestone, marble or other acid sensitive surfaces).

LTP Grimex 1L

Heavy Duty Grime & Stain Remover. Ideal for use in Restoring Old Tiles and Floors Stain Remover: including Oil, Grease and Dirt. Removes Old Wax Layers. For Interior & Exterior Use     Suitable for artificial and natural tiles and floors including travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick, external paving and driveways. Intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths. To remove cement and grout stains you may find LTP Grout Stain Remover is a more effective alternative. Important: Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by   TIPS: LTP Grimex is effective at removing the seal from natural stone surfaces. After using LTP Grimex you may wish to re seal or enhance your surface using an appropriate sealing product. Maintaining your sealed surface with the correct maintenance product will extend the life of the seal and offer additional protection.

LTP Mattstone 1L

Natural matt finish impregnating sealer Water, oil & grease repellant Allows surfaces to breathe. Minimal change to the natural appearance.   Suitable for all types of natural and artificial stone, unglazed porcelain, sandstone, slate, marble, terracotta, quarry, brick & concrete. A natural matt finish impregnating sealer that, on some stones, may also delicately enhance colour and texture. Helps protect against staining.  Strongly repels water, oil and grease. Allows surfaces to breathe. Maintain with LTP Waxwash for floors and LTP Stonewash for walls.

LTP Ironwax Satin 1L

Self-shine satin finish film forming acrylic sealer Suitable for Interior use only. Low maintenance. Protects against staining & dirt. Easy to apply, low maintenance self-shine satin finish film forming acrylic sealer. Enhances colour and texture, protects against staining and stubborn dirt, easy to maintain. May be used on travertine, limestone, sandstone, slate, un-polished marble, terracotta, porous quarries, bricks, terrazzo and concrete Suitable for domestic and commercial use. Maintain with LTP Floorshine.

LTP Crackle Glaze Protector 500ml

Colour: Clear Size (ml): 500ml Approximate Coverage: With 2 coats, this should cover up to 5m2    Suitability: For ceramic tiles that have a porous crackle glaze. To be used on crackle glaze tiles and grout joints You can use the LTP Coverage Calculator to confirm how much you will need of this product. The Technical Data sheet can be found here. NOTE: Due to variations in crackle glaze tiles, always test the product first to ascertain the correct number of coats to be applied