XPS Grooved Tile Backer Board 60cm x 120cm x 20mm

Sold Per Board • 20mm overall thickness (including 3mm cement coating)• Pre-routed for 15mm and 16mm underfloor heating pipe• 150mm pipe centres• High-density 300kPa XPS insulation core• Reinforced cement-coated surface• Lightweight and easy to cut on site• Suitable for solid and suspended timber floors• Panel size: 1200mm x 600mm• Coverage: 0.72m² per board

Weberset Rapid SPF White 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset Rapid SPF Grey 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF White 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. Weber PR360 is normally recommended for most walls in dry areas. Weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Weberset SPF Grey 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. weber pr360 is normally recommended for most walls in dry areas. weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Weber Weberfloor Flex Flexible Fibre Reinforced Floor Screed 25kg

For Internal Use Low Dust Technology 5 - 50mm Depth 1-2 Hours Set Time 25kg: 5L Mixing Ratio Tile After 2 Hours Coverage: 1.5m² @ 10mm Thickness Bag Size: 25kg

Mapei Shower Waterproofing Kit

Each Kit Contains: 5KG Mapegum WPS Liquid Membrane, 10m Waterproof tape and 0.5KG of primer Coverage (m2): 4m2 Application Temperature Range: +5°C to +35°C  

Tile Bank TPSCREW38 Tilers Ply Screws 38mm(200)

Tile Bank TPSCREW25 Tilers Ply Screws 25mm(200)

Knauf Aquapanel Floor Tile Underlay 900mm x 1200mm 6mm

Classy kitchen floors with large-size natural stone tiles or comprehensive bathroom refurbishments can also be done on old wooden subfloors. Knauf AQUAPANEL® Cement Board Floor Tile Underlay is a light, highly stable dry floor panel, perfectly suited for ceramic, mosaic or natural stone. As part of the Knauf AQUAPANEL® Cement Board range, it is resistant to water or mildew and thus an ideal solution for wet and humid areas. With a thickness of only 6mm, it makes low floor heights possible as well. • Thickness of only 6mm allowing for increased room height.• Can be installed over existing wooden subfloors.• Will not deteriorate in water.• Resistant to mould and mildew.• Easy to score and snap.• No pre-drilling is required.• Only 9 screws per board are necessary.

Slow Set White Easiflex White 20kg Full Pallet Deal - 54 Bags

This is a full pallet deal for 54 bags   Colour: White Size (kg): 20kg Suitability: Fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay

Fiber Cement Board 1200cm x 600cm x 10mm

Water-Resistant board is impervious to water damage and won’t rot, swell, or warp like plywood, even in the wettest conditions. Mould ResistantMouldBlock™ Technology protects your job from unseen mould growth behind walls. Our boards contain no paper facing, a food source for mould, or gypsum, which can disintegrate with continuous water exposure. Fire ResistantOur board is non-combustible and carries an A1 fire rating. Strongest On The MarketHighest flexibility and up to three times the compressive strength of competitive boards. Holds up to 200 kg/m² tile hanging weight. Easy To InstallLightweight and easy to cut with a single score and snap. Sink in screws easily, quickly and securely. Simple Score And SnapMake 2-3 passes with a HardieBacker Score and Snap Knife or any utility knife. Place one hand and knee firmly along the score line and use the opposite hand to pull the board up to snap cleanly in two. A Strong FoundationTighter seam lines make for a stronger underlay. Less MessLess mess and cleaning up when using the score and snap method. Non-AbrasiveNo abrasive debris to scratch floors and sanitary fittings. Less DustLess dust with cleaner cuts.

Mapei MAPEGUM WPS 5kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Mapei MAPEGUM WPS 10kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Slow Set White (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Heat Resist 10L

PALACE Heat-Resist is a polymer-fortified heat-resistant tile adhesive, designed to provide a high-strength, durable bond in areas where tiles are installed around a radiant source of heat which does not reach temperatures in excess of 250°C. This is typical of conditions found around domestic installations such as a log burning fire, cooking range/stove or a traditional Aga Oven. This heat-resistant tile adhesive is a pale grey powder-based blend incorporating special hydraulic binders which produces a non-slump, fast-setting paste. The adhesive is suitable for fixing ceramic, porcelain and vitrified tiles in areas surrounding a radiant source of heat. PALACE Heat-Resist should only be used for fixing tiles onto solid masonry surfaces or cement board structures which are stable when exposed to high temperatures. Note: It is essential to confirm that all tiles selected for use in this type of location are similarly heat-resistant. Conforms to EN 12004 C2FT-S1 and should ideally be used with PALACE Colour-Lock Grout Fast-setting adhesive High early strength Polymer-fortified tile adhesive This heat-resistant tile adhesive can be exposed to temperatures up to 250°C For use around ovens, stoves & log burning fires

Adesilex P9 White 20Kg

 A standard setting, high strength, polymer modified tile adhesive for interior and exterior applications. Ideal for installation of ceramic, porcelain and mosaic tiles on walls and floors. This cement based adhesive has no vertical slip, with an extended open time of approximately 30 minutes, and is workable for up to 60 minutes of installation. Use alongside Mapei grouts and other tiling products for a professional finish. Suitable for swimming pools.

Adesilex P9 Grey 20Kg

 A standard setting, high strength, polymer modified tile adhesive for interior and exterior applications. Ideal for installation of ceramic, porcelain and mosaic tiles on walls and floors. This cement based adhesive has no vertical slip, with an extended open time of approximately 30 minutes, and is workable for up to 60 minutes of installation. Use alongside Mapei grouts and other tiling products for a profession finish. Suitable for swimming pools.

Tile Bank Tp600 Tilers Ply Board 60cm x 120cm x 6mm

Material: Cement Size (cm): 60cm x 120cm Thickness (mm): 6mm Suitability: Recommended for the wall but can be used on the floor N° of boards per square metre (m2): 1.39 boards

Slow Set Grey (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Mapei Ultra Flex S2 Quick Grey 15kg