Weberset Rapid SPF Grey 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF Grey 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. weber pr360 is normally recommended for most walls in dry areas. weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

CT1 Anthracite Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Anthracite Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Grey Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Grey Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

Al-Murad Slow Set Flexible Grey 20kg

Al-Murad Slow Set Flexible (Grey) Wall & Floor Tile Adhesive is an easy to use standard setting adhesive for fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay. It is available in white or grey and gives a 4 hour working time before curing at 24 hours to a fully water-resistant bond suitable for interior / exterior use and locations which are frequently wet. Al-Murad Slow Set Flexible Wall & Floor Tile Adhesive is available in WHITE & GREY, with a long open time and excellent non-slip properties, which make it the perfect choice fixing large format wall tiles in circumstances where a ready mixed adhesive would not be suitable.

Al-Murad Trade Rapid Set Flexi Grey 20Kg

Al-Murad Trade Rapid Set Flexi Grey is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available in grey or white and allows grouting to proceed 3 hours after it cures to a fully water-resistant high early strength bond suitable for interior / exterior use and locations which are frequently wet.

Mapei MAPEGUM WPS 5kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Mapei MAPEGUM WPS 10kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Mapei Keraflex Extra S1 Grey 20kg

Colour: Grey Size (kg): 20kg BENEFITS AND FEATURES:  ▪ Dual consistency certification: thixotropic and fluid▪ No vertical slip▪ Excellent wetting capacity▪ Excellent adhesion▪ Deformable▪ Extended open time▪ Ideal for large-format tiles▪ With very low VOC emissions▪ Fully offset residual Greenhouse Gas emissions

Mapei Kerapoxy 111 Silver Grey 5kg

Kerapoxy is a two-component, very low emission of volatile organic compounds, epoxy-resin-based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. The following features are obtained when used correctly: • Excellent mechanical and chemical resistance, therefore excellent durability. • A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. • Easy workability and finishing. • Becomes very hard and is highly resistant to heavy traffic. • No shrinkage, therefore absence of cracks and fissures. • Uniform colours that are resistant to ultra-violet rays and atmospheric agents. • Excellent bonding.

Mapei Kerapoxy 112 Med Grey 5kg

Kerapoxy is a two-component, very low emission of volatile organic compounds, epoxy-resin-based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. The following features are obtained when used correctly: • Excellent mechanical and chemical resistance, therefore excellent durability. • A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. • Easy workability and finishing. • Becomes very hard and is highly resistant to heavy traffic. • No shrinkage, therefore absence of cracks and fissures. • Uniform colours that are resistant to ultra-violet rays and atmospheric agents. • Excellent bonding.

Tradeflex Grey 20kg

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and it’s fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Slow Set Grey (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Mapei Ultra Flex S2 Quick Grey 15kg

Mapei Mapeker Flexi Grey 20kg

Suitable for Porcelain,Ceramic & Non Moisture Sensitive Natural Stone  Sets in 2-3 hours  Ready to Grout in 3 hours  Wall & Floors Suitable for Underfloor/Undertile Heating  Suitable for Rigid Plywood and Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply) Gypsum Plaster (When Primed with Mapei PrimerG) Plaster Boards, Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in White.

Mapei Keraquick Flexi Grey 20kg

Mapei - Keraquick Rapid-Set Flexible Adhesive (Grey) 20kg  This flexible and fast setting Adhesive is suitable for Porcelain, Ceramic, Walls & Floors, Wooden Floors, Concrete Floors and Swimming Pools.  If you are using it with plywood and chipboard, mix it with Latex Plus. 1 Bag covers a average of 8m2 on walls and 5m2 on floors.  Same Adhesive available in White - Suitable For Porcelain Tiles And Underfloor Heating - Walls & Floors - Non Slip - Polymer Modified                                - Interior & Exterior