Mapei AC 100 Mapesil Silicone Sealant White 310ml - 4 Tube Deal

This is a 4 bag deal - Get 4 for the price of 3 Colour: White Material: Silicone Size (ml): 310ml (Per Tube) Suitability: Recommended for sealing glass, ceramic and anodised aluminium Colour-matched grout available under product ID 10003386 The Technical Data sheet for this item can also be found here *Note: Do not use Mapesil AC for joints in exterior, between ceramic tiles and light-coloured natural stone because dirt could accumulate by the joints. Do not use this to seal aquariums. 

Mapei Ultracolor Plus 100 White 5kg - 4 Bag Deal

This is a 4 bag deal - Get 4 for the price of 3 Colour: White Size (kg): 5kg (Per Bag) Coverage: 15-18m2 (Per Bag)  Suitability: Ideal for polished tiles and mosaics with a joint size up to 4mm, and the area is ready again for use after 24 hours. EN 13888 CG2WA   Colour-matched silicone available under product ID 10006903 You can use the Mapei Coverage Calculator to confirm how much you will need of this product. The Technical Data sheet for this item can also be found here

Weberset Rapid SPF White 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF White 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. Weber PR360 is normally recommended for most walls in dry areas. Weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Gel-Tech Semi Rapid White 20kg

Suitable for ceramic, marble, stone, porcelain, mosaics, glass & large format tiles Contains 33% recycled raw materials Walk on & ready to grout in 24 hours Excellent initial grab & non-slip High yield thixotropic properties

CT1 White Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: White Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

2mm Cross Shaped Tile Spacers 500 Pcs

Colour: White Thickness (mm): 2mm N° of Pieces per Pack: 500 This product is also available in 250 Pcs

2mm Cross Shaped Tile Spacers 250 Pcs

Colour: White Thickness (mm): 2mm N° of Pieces per Pack: 250 This product is also available in 500 Pcs

Mapei AC 103 Mapesil Silicone Sealant Luna Moon White 310ml

Mapei AC 999 Mapesil Silicone Sealant Transparent 310ml BOX

Mapei AC 100 Mapesil Silicone Sealant White 310ml BOX

Al-Murad Slow Set Flexible White 20kg

Dry Time: 16 Hours Maximum Coverage Area: 2.5 (Wall) m²-4 (Floor) m² Weight: 20 kg Type: Slow Set Adhesive For Use On: Ceramic,Mosaic,Natural Stone,Porcelain Indoor or Outdoor: Indoor & Outdoor Colour: White

Al-Murad Trade Rapid Set Flexi White 20Kg

Al-Murad Trade Rapid Set Flexi White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and its fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Slow Set White Easiflex White 20kg Full Pallet Deal - 54 Bags

This is a full pallet deal for 54 bags   Colour: White Size (kg): 20kg Suitability: Fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay

STGPSW GP Silicone White

General Purpose Silicone is a mid modulus silicone sealant that adheres to most smooth and non-porous materials. Contains an anti-fungal compound to be mould resistant in areas of high humidity and forms a permanently flexible rubber seal.

Mapei Ultracolor Plus 103 Moon White 5kg

Suitable for: Wall, Floor, Interior, Exterior, Swimming Pool, Pathway And Commercial Area. An exceptionally high performaning Grout, Very fast at drying and setting, It is Polymer Modified and Anti Efflorescence. Also Water Repelling for joints of 2mm to 20mm. With Drop Effect Technology, and Anti Mould with Biotech Technology, Suitable for most areas including those with heavy traffic, i.e - Airports, Shopping Centres And Swimming Pools.

Slow Set White (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Mapei AC 100 Mapesil Silicone Sealant White 310ml

Colour: White Material: Silicone Size (ml): 310ml Suitability: Recommended for sealing glass, ceramic and anodised aluminium Colour-matched grout available under product ID 10003386 The Technical Data sheet for this item can also be found here *Note: Do not use Mapesil AC for joints in exterior, between ceramic tiles and light-coloured natural stone because dirt could accumulate by the joints. Do not use this to seal aquariums. 

Mapei AC 103 Mapesil Silicone Sealant Luna Moon White 310ml BOX

Ultracolor Plus 100 White 5kg

Colour: White Size (kg): 5kg Coverage: 15-18m2 Suitability: Ideal for polished tiles and mosaics with a joint size up to 4mm, and the area is ready again for use after 24 hours. EN 13888 CG2WA   Colour-matched silicone available under product ID 10006903 You can use the Mapei Coverage Calculator to confirm how much you will need of this product. The Technical Data sheet for this item can also be found here