XPS Tile Backer Board 60cm x 120cm x 30mm

Sold Per Board All boards are 1200 x 600 x 30mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

XPS Tile Backer Board 60cm x 120cm x 50mm

Sold Per Board All boards are 1200 x 600 x 50mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

XPS Grooved Tile Backer Board 60cm x 120cm x 20mm

Sold Per Board • 20mm overall thickness (including 3mm cement coating)• Pre-routed for 15mm and 16mm underfloor heating pipe• 150mm pipe centres• High-density 300kPa XPS insulation core• Reinforced cement-coated surface• Lightweight and easy to cut on site• Suitable for solid and suspended timber floors• Panel size: 1200mm x 600mm• Coverage: 0.72m² per board

Weberset Rapid SPF White 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset Rapid SPF Grey 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF White 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. Weber PR360 is normally recommended for most walls in dry areas. Weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Weberset SPF Grey 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. weber pr360 is normally recommended for most walls in dry areas. weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Weber Weberfloor Flex Flexible Fibre Reinforced Floor Screed 25kg

For Internal Use Low Dust Technology 5 - 50mm Depth 1-2 Hours Set Time 25kg: 5L Mixing Ratio Tile After 2 Hours Coverage: 1.5m² @ 10mm Thickness Bag Size: 25kg

Tile Bank Tbase30 Waterproof Membrane Full 30M Roll Deal

This item is priced for 1 full roll, covering 30 square meters

XPS Tile Backer Board 60cm x 240cm x 10mm

Sold Per Board All boards are 2400 x 600 x 10mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw High-Performance Extruded Polystyrene (XPS) Core

SAAO Spray Adhesive 500ml

Brand: Strong as an Ox Size (ml): 500ml Suitability: Recommended for use in home decorating, crafts, construction and quick household fixes

SAAO Carpet Adhesive 500ml

Brand: Strong as an Ox Size (ml): 500ml Suitability: Recommended for use on card, paper, fabric and carpet

XPS Tile Backer Board 60cm x 120cm x 10mm (Full Pallet Deal)

Sold Per Pallet (140 Boards) All boards are 1200 x 600 x 10mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

XPS Tile Backer Board 60cm x 120cm x 6mm (Full Pallet Deal)

Sold Per Pallet (220 Boards) All boards are 1200 x 600 x 6mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

CT1 Clear Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Clear Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Anthracite Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Anthracite Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Beige Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Beige Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Grey Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Grey Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 White Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: White Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Black Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Black Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

TBBSCREW30 Tile Bank Backer Board M5 x 30mm Screws (50 Pcs)

Tile Bank zinc-coated fixing screws are made up of a coarse thread, used to fasten Tile Bank tile backer boards to wood stud framing, with the corresponding galvanised steel washers. This item is to be used with product ID 10019644

Knauf Aquapanel Floor Tile Underlay 900mm x 1200mm 6mm

Classy kitchen floors with large-size natural stone tiles or comprehensive bathroom refurbishments can also be done on old wooden subfloors. Knauf AQUAPANEL® Cement Board Floor Tile Underlay is a light, highly stable dry floor panel, perfectly suited for ceramic, mosaic or natural stone. As part of the Knauf AQUAPANEL® Cement Board range, it is resistant to water or mildew and thus an ideal solution for wet and humid areas. With a thickness of only 6mm, it makes low floor heights possible as well. • Thickness of only 6mm allowing for increased room height.• Can be installed over existing wooden subfloors.• Will not deteriorate in water.• Resistant to mould and mildew.• Easy to score and snap.• No pre-drilling is required.• Only 9 screws per board are necessary.

Thermal Backer Board 12.5mm

Tile backer board 12.5mm Sold Individually 

Al-Murad Slow Set Flexible White 20kg

Dry Time: 16 Hours Maximum Coverage Area: 2.5 (Wall) m²-4 (Floor) m² Weight: 20 kg Type: Slow Set Adhesive For Use On: Ceramic,Mosaic,Natural Stone,Porcelain Indoor or Outdoor: Indoor & Outdoor Colour: White

Al-Murad Trade Rapid Set Flexi White 20Kg

Al-Murad Trade Rapid Set Flexi White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and its fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Al-Murad Slow Set Flexible Grey 20kg

Al-Murad Slow Set Flexible (Grey) Wall & Floor Tile Adhesive is an easy to use standard setting adhesive for fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay. It is available in white or grey and gives a 4 hour working time before curing at 24 hours to a fully water-resistant bond suitable for interior / exterior use and locations which are frequently wet. Al-Murad Slow Set Flexible Wall & Floor Tile Adhesive is available in WHITE & GREY, with a long open time and excellent non-slip properties, which make it the perfect choice fixing large format wall tiles in circumstances where a ready mixed adhesive would not be suitable.

Al-Murad Trade Rapid Set Flexi Grey 20Kg

Al-Murad Trade Rapid Set Flexi Grey is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available in grey or white and allows grouting to proceed 3 hours after it cures to a fully water-resistant high early strength bond suitable for interior / exterior use and locations which are frequently wet.

Slow Set White Easiflex White 20kg Full Pallet Deal - 54 Bags

This is a full pallet deal for 54 bags   Colour: White Size (kg): 20kg Suitability: Fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay

XPS Tile Backer Board 60cm x 120cm x 6mm (Full Box Deal)

Sold Per Box (10 Boards) All boards are 1200 x 600 x 6mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

XPS Tile Backer Board 60cm x 120cm x 10mm (Full Box Deal)

Sold Per Box (10 Boards) All boards are 1200 x 600 x 10mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

Fiber Cement Board 1200cm x 600cm x 10mm

Water-Resistant board is impervious to water damage and won’t rot, swell, or warp like plywood, even in the wettest conditions. Mould ResistantMouldBlock™ Technology protects your job from unseen mould growth behind walls. Our boards contain no paper facing, a food source for mould, or gypsum, which can disintegrate with continuous water exposure. Fire ResistantOur board is non-combustible and carries an A1 fire rating. Strongest On The MarketHighest flexibility and up to three times the compressive strength of competitive boards. Holds up to 200 kg/m² tile hanging weight. Easy To InstallLightweight and easy to cut with a single score and snap. Sink in screws easily, quickly and securely. Simple Score And SnapMake 2-3 passes with a HardieBacker Score and Snap Knife or any utility knife. Place one hand and knee firmly along the score line and use the opposite hand to pull the board up to snap cleanly in two. A Strong FoundationTighter seam lines make for a stronger underlay. Less MessLess mess and cleaning up when using the score and snap method. Non-AbrasiveNo abrasive debris to scratch floors and sanitary fittings. Less DustLess dust with cleaner cuts.

Mapei MAPEGUM WPS 5kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Mapei MAPEGUM WPS 10kg

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Tile Bank Turtle Tapes 24mm x 44mm (16PB)

Turtle Tape provides good adhesion to most surfaces and is easily removed without any adhesive residue. Decorators tape is perfect for masking off surfaces or achieving straight lines when painting and decorating. Easy-to-tear means you can tear and apply as needed, masking off areas that you do not want painted.   For Use on Walls, Wood, Glass & Metal UV-Resistant Unique Paintblock Technology Razor Sharp Lines Gives Clean Peel for up to 21 Days

Tile Bank Turtle Tapes 36mm x 44mm (12PB)

Turtle Tape is perfect for masking off surfaces or achieving straight lines when painting and decorating. Easy-to-tear means you can tear and apply as needed, masking off areas that you do not want painted.   For Use on Walls, Wood, Glass & Metal UV-Resistant Unique Paintblock Technology Razor Sharp Lines Gives Clean Peel for up to 21 Days

Mapelastic Aquadefense Tanking Kit 7.5kg

A ready to use kit for the rapid waterproofing of bathrooms, wet rooms and showers to receive tiles after 4 hours. The tanking kit comprises of Mapelastic AquaDefense and Mapeband PE 120, which is used to form waterproofing layers before applying ceramic, stone and mosaic coatings to areas in contact with moisture and running water. The Kit consists of: 1 x 7.5kg Aquadefense Bucket 1 x 10m Roll of Mapeband PE120

Waterproof Fix & Grout 3.75kg

Tbase30 Waterproof Membrane

Slow Set White (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Tile Bank 1065 10" Soft Grip Wire Brush

The wire brush can be used for cleaning patios and barbeques and cleaning small parts such as contacts on spark plugs. It can also be used for cleaning paint, rust, damp patches from brickwork, woodwork, metalwork etc.

XPS Tile Backer Board 60cm x 120cm x 6mm

Sold Per Board All boards are 1200 x 600 x 6mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife, no need for a jigsaw

XPS Tile Backer Board 60cm x 120cm x 10mm

Sold Per Board All boards are 1200 x 600 x 10mm  Tile backer boards are waterproof and dimensionally stable substrate to tile to Ideal for wet rooms Easy to carry - and light weight unlike large sheets of plywood. Excellent sound insulation: impact sound is greatly reduced Cuts with a knife. no need for a jigsaw

Tile Bank 1041 Bucket Trowel 50X110MM

Designed for Removing Wet Mortare from a Bucket Deep Swan Neck Handle Design Flat End Carbon Steel Blade Wooden Handle

Tradeflex Grey 20kg

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and it’s fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Tradeflex White 20kg

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and it’s fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Slow Set Grey (Easiflex) 20kg

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

LTP Floorshine 1L

Colour: Clear Size (ml): 1000ml Approximate Coverage: 1L should be sufficient to wash an average floor of 20m2 approximately 40 times    Suitability: Recommended for use with tiled, wood and laminate surfaces You can use the LTP Coverage Calculator to confirm how much you will need of this product. NOTE: Use in place of your normal detergent. Do not mix with any other cleaning agent. Not suitable for highly polished tiled surfaces - for correct maintenance of this type of surface, use LTP Porcelain Floor Tile Cleaner or LTP Stonewash

Mapei Mapeker Rapid Set Flexi White 20kg

Mapei - Mapeker Rapid-Set Flexi (White) 20kg  - Suitable for Porcelain, Ceramic & Non Moisture Sensitive Natural Stone- Sets in 2-3 hours- Ready to Grout in 3 hours- Wall & Floors- Suitable for Underfloor/Undertile Heating- Suitable for Rigid Plywoodand Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply)- Gypsum Plaster (When Primed with Mapei PrimerG)- Plaster Boards, - Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in Grey.

Mapei Mapeker Flexi Grey 20kg

Suitable for Porcelain,Ceramic & Non Moisture Sensitive Natural Stone  Sets in 2-3 hours  Ready to Grout in 3 hours  Wall & Floors Suitable for Underfloor/Undertile Heating  Suitable for Rigid Plywood and Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply) Gypsum Plaster (When Primed with Mapei PrimerG) Plaster Boards, Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in White.

Mapei Keraquick Flexi Grey 20kg

Mapei - Keraquick Rapid-Set Flexible Adhesive (Grey) 20kg  This flexible and fast setting Adhesive is suitable for Porcelain, Ceramic, Walls & Floors, Wooden Floors, Concrete Floors and Swimming Pools.  If you are using it with plywood and chipboard, mix it with Latex Plus. 1 Bag covers a average of 8m2 on walls and 5m2 on floors.  Same Adhesive available in White - Suitable For Porcelain Tiles And Underfloor Heating - Walls & Floors - Non Slip - Polymer Modified                                - Interior & Exterior

Mapei Keraquick Flexi White 20kg

Mapei Keraquick Rapid Set Flexible Adhesive White 20kg This flexible and fast setting White Adhesive is suitable for Porcelain, Ceramic, Walls & Floors, Wooden Floors and Concrete Floors.  If you are using it with plywood and chipboard, mix it with Latex Plus.  Same Adhesive available in Grey.